- Contact Person : Mr. He Horace
- Company Name : Shenzhen Bester Energy Saving Technology Ltd.
- Tel : 086--0755-29031432
- Fax : 086--0755-61641013
- Address : Guangdong,Shenzhen,2F, D building, Shanghe industral park ,Nanchang north Road,Gushu, Xixiang,bao'an
- Country/Region : China
- Zip : 518000
150W led high bay light
150W led high bay light
Product Appearance
Speciality
1. Adopting Bridgelux integrated Chip as light source with high lighting efficiency, high CRI, low light degradation.
2. There is build-in dedicated Taiwan Meanwell power supply, input voltage: AC100-240V,Power Efficiency:>90%,Power Factor:>0.95,constant voltage, constant current. Over voltage \ over power \ over current protection, lighting protection.
3. Good aluminum alloy heat sink with good quality heat dissipation, aluminum alloy equipment box, high strength, IP 64,small reflector cap for focusing the light, big one for gathering the light, it achieves an ideal lighting effect.
4. Can start up within 1-3 seconds, no flicker, anti-jamming, no mercury, energy saving, environment friendly
Parameter
Net weight: 45 Degree:5.92 KG / 90 Degree:5.93 KG / 120 Degree:5.99KG
Gross weight: 45 Degree:7.12 KG/ 90 Degree:7.33 KG / 120 Degree:7.39KG
Products Details
LED lamp
Taiwan Meanwell Power Supply
Diagram of degradation for Luminous
1. The data above has been got at a temperature of 25 celsius degree and taking 1000 hours running by a nonstop way.
2. Degradation of luminous flux of LED lamps depends on environmental conditions. The higher the temperature, the longer the using time, the faster luminous flux drops.
Photomatric Data
Illumination Distance/illuminance/Irradiated Area
Packing
Lamp Packing:(L)310×(W) 250×(H) 430mm 1PC/CTN (L)640×(W) 520×(H) 450mm 4PCS/CTN
Reflector Packing:45 Degree (L)440×(W) 440×(H) 380mm 10PCS/CTN
90/120 Degree (L)520×(W) 520×(H) 330mm 10PCS/CTN
Using and installing instructions
As Picture No.1 Showed, Install reflector on the heat sink, wrest fixed screws very tightly
As Picture No.2 Showed, Wrest hanger into top cap, wrest lock screw very tightly
As Picture No.3 Showed, Hang the lamp on the installation site,and screw down the non skid lock .
As Picture No.4. 5 Showed, Hang chaining of steel wire on another installation device.
As Picture No.6 Showed, Connect Live Wire/Null Wire/Ground Wire to electric cable properly and switch on.
Attentions
1. Only professional electrician can install the lamp, please check the lamp very carefully before installation
2. Please install the lamp follow up the installation procedure, make sure the screw has been wrested very tightly, the wires have been connected properly, .Please operate according to Product Instructions enclosed.
Application
150W led high bay light
